In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks which you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the backyard and other areas of the house, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so that you get something that looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so that you can ensure that nothing will leak once you place the mask on. Be sure that the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so that you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you are done, so that you don’t wind up with smudges or smears on your dog.
Then it is time to paste the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can begin to glue the mask onto the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you have the mask snugged securely onto the face of your dog. Do not make the folds too large or else it might look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Make certain that the ears are level and make url sure that it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask as your pet security, you’ll have to do some sanding to make certain it is safe on your dog. You can do this by sanding off any excess paper that may have been eliminated from your mask.